Product Categories

6-350/1100

REQUEST A QUOTE

PRODUCT CHARACTERISTICS

TECHNICAL SPECS

PERFORMANCE IMAGES

HOW TO

TYPICAL APPLICATION

6-350/1100

Enginaire Composite Air Pre-cleaners are constructed with heavy duty composite materials, sealed ball bearings and are light weight.

Engine air precleaners are designed to remove most of the contaminants from the air that feeds the engine.

The advantage of removing these contaminants is extended filter life, improved fuel economy, and reduced engine wear.

Turbochargers, blowers, cylinder liners, piston rings, and engine oil can fail because of contamination entering the engine through the air filter.

Air precleaners are designed to remove dirt particles before they get to the air filter.

The benefit of using an Enginaire Air Precleaner is longer engine life.

Depth ID = 6.0 Inches

Width: B = 12.0 Inches

Height: A = 7.25 Inches

Weight: 5.67 lbs

Diesel Engine Capacity: 350 - 1100 CFM

Specific Characteristics:

Caution - The Precleaner selection must be based on engine airflow specifications, not on inlet tube diameter.

Lifetime Warranty

Eng_composite_broch_techrev.pdf

Air of the engine intake powers the PreCleaner.

1. Incoming air is drawn through the angled louver plates
2. The intake air turns the stainless steel rotor
3. The stainless steel rotor is mounted on dual precision ground, sealed, heavy duty bearings
4. The centrifugal force caused by the high speed spinning motion of the rotor, separates the contaminants from the air, throwing them to the inner perimeter of the hood
5. The contaminants are expelled out through the directional discharge port
6. The Clean, dry air is drawn into the plenum chamber
7. The Clean, dry air is then drawn into the engine

Enginaire precleaners can be installed in almost any plane; horizontal, vertical, transverse or parallel.
Precleaner selection is based on engine airflow specifications
To install remove the existing rain cap, dust bowl or other style precleaner

Not sure of which model is appropriate,? contact Customer Service with the following information;